Faucet Installation Across Benbrook and Greater Fort Worth
TD Plumbing Solutions installs kitchen, bathroom and outdoor faucets for homes across Benbrook and Greater Fort Worth. Terrill Dobbs, a licensed master plumber, sets each one himself.
Pick the faucet yourself, or ask Terrill what fits before you buy. He checks the shutoff valves and supply hoses, sets the faucet and tests hot and cold for drips. You hear the price first, and most swaps take an hour or two.
Signs It's Time for Faucet Installation
Maybe you want a new look for the kitchen, or an outdoor spigot that works after a hard freeze. A new faucet only works well if the valves and hoses behind it are sound.
When the faucet body is worn or cracked, new parts will not hold.
Water left in the pipe can freeze and split it inside the wall.
Hard water scale eats at finishes over the years. A new faucet is easier to keep clean.
A new sink, counter or vanity is the right time for a new faucet and fresh hoses.
Newer styles need room under the sink, and some need power.
Stuck valves make any swap harder. We replace them during the install.
Not sure your new faucet fits your sink? Call and a real person will help. Call (817) 229-9450 · Available 24/7 for emergencies
How Long It Takes
Job
Typical time
Kitchen or bath faucet swap
About 1 to 2 hoursLonger if valves or hoses need replacing.
Outdoor faucet replacement
About 1 to 3 hoursDepends on the wall and how easy the pipe is to reach.
Faucet with new sink
Half a day or soDrain work and fitting the sink add time.
Typical ranges, not promises. Terrill tells you the real timeline once he has seen the job.
How Faucet Installation Works With TD
1
Look and price it
Terrill checks your sink, valves and hoses, then gives you the price.
2
Shut off and remove
We close the valves, take out the old faucet and clean old putty and scale off the sink.
3
Set and connect
The new faucet goes in square and tight. Worn valves or hoses are swapped now, not next year.
4
Test and walk through
We run hot and cold at full pressure and check under the sink for drips.
Need Faucet Installation?
Talk to Terrill about your job in Benbrook. You get the fix and the price before any work starts. Emergencies are answered 24/7.
Most faucet installs are simple, but a few things change the price. Terrill gives you the full price before he starts.
Type of faucet
A basic swap costs less than a pull-down or touchless model.
Valves and hoses
Stuck shutoff valves or old hoses add parts and time.
Indoor or outdoor
Outdoor faucets through brick can take more work to reach.
Sink and counter
A new sink or new holes add fitting work.
Every price is given before work starts. Larger jobs can be financed through Hearth.
Why Homeowners Choose TD Plumbing Solutions
Master plumber on the job
Terrill Dobbs, Texas Responsible Master Plumber RMP 45333, does the install himself.
Price before work
Clear upfront pricing, zero sales pressure.
Warranty follow-through
We back our workmanship and pursue the maker's warranty on parts we install.
A real person answers
No phone menu. You talk to someone who can help you plan the job.
Lisa Alderson called Terrill at 10:45 about a leaking outdoor faucet, and he was there a few hours later to replace both her front and back faucets.
Faucet Installation in North Texas Homes
Water here is hard. Its white scale stiffens handles and wears out seals. Before we set a new faucet, we flush the lines so loose scale does not clog the new aerator on day one.
Hard freezes are rare in North Texas, but the February 2021 storm showed the damage they do. Outdoor faucets crack first. If one split in the wall, we replace it and check the pipe behind it.
Common Questions
Who installs faucets in Benbrook, TX?
TD Plumbing Solutions installs kitchen, bath and outdoor faucets in Benbrook and across Greater Fort Worth. Owner Terrill Dobbs, a licensed master plumber, does the work himself. He checks your valves and hoses, gives you the price first and tests the faucet before he leaves.
Can a plumber install a faucet I bought myself?
Yes. Many homeowners buy their own faucet and have us put it in. Keep the box handy so Terrill can check the parts and hole count. If it will not fit your sink, he will tell you before any work starts.
Should I replace an outdoor faucet after a freeze?
If the spigot leaks, sprays or will not shut off after a hard freeze, the faucet or the pipe behind it has likely split. Replacing it is usually right. We also check the pipe inside the wall so a hidden leak does not soak it.
Frequently Asked Questions
Most kitchen faucet swaps take about one to two hours. It runs longer if the shutoff valves are stuck or the old faucet is crusted with scale. Terrill tells you what he sees before he starts, so you know the time and price.
Often, yes. Old braided or rubber hoses can wear and burst without warning. If yours look worn, kinked or rusty at the ends, we replace them during the install. It costs far less now than a leak under the sink later.
Sometimes. If the sink or counter already has the right holes, it is simple. If new holes are needed, it depends on the sink and counter material. Terrill will tell you what is possible and the price before anything is drilled.
Outdoor faucets often age at the same rate, and one hard freeze can hurt both. When one fails, the other may be close behind. Terrill checks both and tells you straight if the second one still has life. He will not replace one you do not need.
Not much harder than a standard faucet, but it needs power. Most run on batteries, and some need an outlet under the sink. There must also be room for the control box. We check the space during the visit, so there are no surprises.
Faucet Installation by City
Pick your town for local details on faucet installation there, or call and Terrill will tell you straight what your home needs.