Faucet Installation in Richland Hills
TD Plumbing Solutions handles faucet installation in Richland Hills, TX, about 16 miles northeast of our Benbrook base, with Texas Master Plumber Terrill Dobbs doing the work himself.
- 24/7 Emergency Service
- Texas Master Plumber RMP 45333
- Serving Benbrook Since 2005
- Financing Through Hearth
Richland Hills is about 16 miles northeast of our Benbrook base. The drive is about 25 to 40 minutes, usually by I-30 east to Loop 820 north. We work all over Richland Hills, including Baker Landing and Baker Boulevard corridor. You talk to a real person when you call, and Terrill gives you the price before any work starts.
Signs It's Time for Faucet Installation
Not sure your new faucet fits your sink? Call and a real person will help. Call (817) 229-9450 · Available 24/7 for emergencies
How Long It Takes
| Job | Typical time |
|---|---|
| Kitchen or bath faucet swap | About 1 to 2 hoursLonger if valves or hoses need replacing. |
| Outdoor faucet replacement | About 1 to 3 hoursDepends on the wall and how easy the pipe is to reach. |
Typical ranges, not promises. Travel time from our Benbrook base: about 25 to 40 minutes.
Faucet Installation in Richland Hills Homes
Many kitchens and baths in Richland Hills still have faucets and shutoffs from an older remodel. When we install a new faucet, we also check the supply lines and valves under the sink, since hard water often leaves them stiff or crusted. That way the new faucet is not tied to worn parts.
Where We Work in Richland Hills
- Baker Landing
- Baker Boulevard corridor
- Kate Baker Park area
- Big Fossil Creek area
- Grapevine Highway corridor
- Link Plaza area
How Faucet Installation Works With TD
- 1
Look and price it
Terrill checks your sink, valves and hoses, then gives you the price.
- 2
Shut off and remove
We close the valves, take out the old faucet and clean old putty and scale off the sink.
- 3
Set and connect
The new faucet goes in square and tight. Worn valves or hoses are swapped now, not next year.
Faucet Installation in Richland Hills?
You get the fix and the price before any work starts.
What Affects the Price in Richland Hills
| Type of faucet | A basic swap costs less than a pull-down or touchless model. |
|---|---|
| Valves and hoses | Stuck shutoff valves or old hoses add parts and time. |
| Distance to Richland Hills | About 16 miles northeast of our Benbrook base, by I-30 east to Loop 820 north. |
Price before work starts. Hearth financing on larger jobs.
Faucet Installation Questions From Richland Hills
Yes. We are happy to install a faucet you picked out. Keep the box and parts together, and check that it fits the number of holes in your sink. We will check the supply lines and shutoff valves too. If any need replacing, Terrill tells you the price before adding it.
It depends on the schedule and how urgent it is. Emergencies are answered 24/7 by a real person. Planned work is booked at a time that suits you, and we give you an honest arrival time when you call.
Often, yes. Old braided or rubber hoses can wear and burst without warning. If yours look worn, kinked or rusty at the ends, we replace them during the install. It costs far less now than a leak under the sink later.
More Plumbing in Richland Hills
See our faucet installation service, our plumber in Richland Hills page or contact us.
Call TD for Faucet Installation in Richland Hills
A real person answers, day or night.